A collaborative robot palletizer, the RC10 handles payloads of up to 8kg at eight boxes per minute. Without a fence or cage surrounding it, the small footprint gives flexibility in its location.
Following ISO standard TS 15066 for robots, the RC10 is designed to work alongside personnel; if an operator comes into contact with the robot arm, it will automatically stop to reduce the risk of injury.
Robot Config software allows the operator to quickly design a new pallet pattern or load an existing one, including interlayers and adjustments for label location. The drag-and-drop tool eliminates design errors and takes less than 10 minutes to create the first configuration. It eliminates the need for programming or training.

A collaborative robot palletizer, the RC12 handles payloads of up to 10kg at twelve boxes per minute. Without a fence or cage surrounding it, the small footprint gives flexibility in its location.
Following ISO standard TS 15066 for robots, the RC12 is designed to work alongside personnel; if an operator comes into contact with the robot arm, it will automatically stop to reduce the risk of injury.
Robot Config software allows the operator to quickly design a new pallet pattern or load an existing one, including interlayers and adjustments for label location. The drag-and-drop tool eliminates design errors and takes less than 10 minutes to create the first configuration. It eliminates the need for programming or training.

A collaborative robot palletizer, the RC14 handles payloads of up to 12kg at twelve boxes per minute. Without a fence or cage surrounding it, the small footprint gives flexibility in its location.
Following ISO standard TS 15066 for robots, the RC14 is designed to work alongside personnel; if an operator comes into contact with the robot arm, it will automatically stop to reduce the risk of injury.
Robot Config software allows the operator to quickly design a new pallet pattern or load an existing one, including interlayers and adjustments for label location. The drag-and-drop tool eliminates design errors and takes less than 10 minutes to create the first configuration. It eliminates the need for programming or training

With the ability to handle payloads of up to 15kg at 12 cycles per minute, the RI20 does not have a mainframe attached to the floor, making it a mobile solution suitable for use in multiple production lines.​
Robot set-up and configuration are straightforward, thanks to the user-friendly design of the interface. Also available on a tablet, in addition to the control panel, there is no need for complicated programming or robotics training, meaning the RI20 facilitates quick and easy set-up. FlexLink also offers a data collection package and a telephone helpline for remote assistance.
Two pallet loading positions enable continuous operations, and an enhanced safety system creates a safe co-existence with operators. When motion is detected in the safety area, the production does not stop. Instead, it slows down. The movement is identified by scanners and light curtains, changing the robot arm’s speed.

BRIXX® is a new, modular, click-and-play solution based on an intuitive software to reduce the manual operations and allow quick transformations for co-packing lines. Based on advanced, mobile conveyors and robots to automate manual repetitive packing and co-packing processes.
This unique design by FlexLink is a solution to automate currently manual packing operations through a flexible system adapting to the variability of products, packs, cartons, or trays. It is scalable according to production capacity needs, affordable and easy-to-use.
It is controlled by an intuitive software for line design and operations, as well as fleet management allowing to manage seasonal peak productions.
The flexible combination of BRIXX® modules enables a wide range of operations with the same hardware and software. Production companies or co-packers can automate product transformations such as pick-and-place, mixing, labeling, re-labeling, palletizing or de-palletizing for increased productivity and efficiency. More product transformations such as case forming, tray forming, and carton closing are optionally available.



  • A collaborative robot palletizer, the RC14 handles payloads of up to 12kg at twelve boxes per minute. Without a fence or cage surrounding it, the small footprint gives flexibility in its location.
  • Following ISO standard TS 15066 for robots, the RC14 is designed to work alongside personnel; if an operator comes into contact with the robot arm, it will automatically stop to reduce the risk of injury.
  • Robot Config software allows the operator to quickly design a new pallet pattern or load an existing one, including interlayers and adjustments for label location.
  • The drag-and-drop tool eliminates design errors and takes less than 10 minutes to create the first configuration. It eliminates the need for programming or training
  • A collaborative robot palletizer,the RC12 handles payloads of up to 10kg at twelve boxes per minute. Without a fence or cage surrounding it, the small footprint gives flexibility in its location.
  • Following ISO standard TS 15066 for robots, the RC12 is designed to work alongside personnel; if an operator comes into contact with the robot arm, it will automatically stop to reduce the risk of injury.
  • Robot Config software allows the operator to quickly design a new pallet pattern or load an existing one, including interlayers and adjustments for label location. 
  • The drag-and-drop tool eliminates design errors and takes less than 10 minutes to create the first configuration. It eliminates the need for programming or training.
  • A collaborative robot palletizer, the RC10 handles payloads of up to 8kg at eight boxes per minute. Without a fence or cage surrounding it, the small footprint gives flexibility in its location.
  • Following ISO standard TS 15066 for robots, the RC10 is designed to work alongside personnel; if an operator comes into contact with the robot arm, it will automatically stop to reduce the risk of injury.
  • Robot Config software allows the operator to quickly design a new pallet pattern or load an existing one, including interlayers and adjustments for label location.
  • The drag-and-drop tool eliminates design errors and takes less than 10 minutes to create the first configuration. It eliminates the need for programming or training.